In Part 1, you will set up the network topology and configure basic settings, such as the interface IP addresses, device access, and passwords on the devices. Instructions Part 1: Configure Basic Device Settings
Ethernet cables as shown in the topology. Console cables to configure the Cisco IOS devices via the console ports. 1 PC (Windows with a terminal emulation program, such as Tera Term). 1 Switch (Cisco 2960 with Cisco IOS Release 15.2(2) lanbasek9 image or comparable). 1 Router (Cisco 4221 with Cisco IOS XE Release 16.9.4 universal image or comparable). If you are unsure, contact your Answers.Īnswers Note : Refer to the Answers Lab Manual for the procedures to initialize and reload devices. Note : Make sure that the routers and switches have been erased and have no startup configurations. Refer to the Router Interface Summary T able at the end of the lab for the correct interface identifiers. Depending on the model and Cisco IOS version, the commands available and the output produced might vary from what is shown in th e labs. Other routers, switches, and Cisco IOS versions can be used. The switches used in the labs are Cisco Catalyst 2960s with Cisco IOS Release 1 5.2(2) (lanbasek9 image). Note : The router s used with CCNA hands-on lab s are Cisco 4221 with Cisco IOS XE Release 1 6.9.4 (universalk9 image). You will then test the security measures to verify that they are properly implemented and working correctly. You will also use the IOS CLI to configure common, basic best practice security measures. 
In this lab, you will configure the network devices in the topology to accept SSH sessions for remote management.
This includes end user devices, servers, and network devices, such as routers and switches. It is recommended that all network devices be configured with at least a minimum set of best practice security commands. Part 3: Configure Basic Security Measures on the Switch Background / Scenario
Part 2: Configure Basic Security Measures on the Router
0 kommentar(er)
